Digital Display Single Phase (new type din rail ) Electronic Energy Meter Україна

XTM75S-U single phase (new type din rail ) electronic energy meter, it adopts micro-electronic techniques measure electric energy: adopts imported large scale integrate circuit, use advanced technique of digital and SMT techniques,it’s a new type single phase two wire electronic watt-hour meter.This energy meter completely accords with GB/T71215.321-2008 CNS (Class.1 and Class 2.0 Static AC active energy meter ) relevant technical requirements ; can accurately and direct measure the energy metering 50Hz or 60Hz single phase AC power grid load active electricity consumption , the 8 (6 + 2) LCD display active total electricity consumption, this meter has infrared and RS485 communication interface, optional 645 or MODBUS communication, it is an ideal energy meter upgrade products. With good reliability, small size, light weight, beautiful appearance, advanced technology, 35mmDIN standard rail mounting features.Currently the energy meter has got China's State Intellectual Property Office issued a patent certificate.

2.Function and features

35mm standard Din rail installation,complying with standard DIN EN50022.

Six pole width (Modulus 12.5mm),complying with standard DIN 43880.

Rated voltage: 127V-230V

Rated current: 10(40) 10(60) 20(100)A

Starting current: 0.04%Ib

Active energy measure accuracy: Class 1.0

Insulation performance: AC voltage 2Kv for 1 minute impulse voltage 6kv

Standard configuration 6+2 (8 digital )LCD (999999.11kwh )display

Standard configuration Impulse output passive (polarity), may select distant impulse output

Passive(no polarity).

May select a port of far infrared data communication and a port of RS485 data communication,

Standard configuration communication agreement complying with MODBUS-RTU, also you can

Choose other communication agreement.

Two LED instructions power supply state(green) and signal of power impulse( red).

May measure active, current, voltage, power and frequency and so on.

Automatic detection the direction of the flow of load current,(only red energy power impulse signal works, there is no green power LED, it means Load current flows in the opposite direction.

Single direction measure single phase two wire active power consumption. It is nothing with direction of the flow of load current. Complying with Standard IEC62053-21.

Standard configuration U type wiring.

Short protective cover, can reducing installation space and easy centralized installation

Terminal

1 and 2 in/out

3 and 4 in/out

5 and 6 impulse output

9 and 10 communication terminal

it adopts micro-electronic techniques measure electric energy，35mm standard Din rail installation，Six pole width (Modulus 12.5mm),complying with standard DIN 43880. Rated voltage: 127V-230V，Rated current: 10(40) 10(60) 20(100)A，Starting current: 0.04%Ib. Active energy measure accuracy: Class 1.0

abb din rail energy meter

single phase din rail energy meter

din rail energy meter

this meter has infrared and RS485 communication interface, optional 645 or MODBUS communication, it is an ideal energy meter upgrade products. With good reliability, small size, light weight, beautiful appearance, advanced technology, 35mmDIN standard rail mounting features.Currently the energy meter has got China's State Intellectual Property Office issued a patent certificate.